军达成技术总监 发表于 2012-8-8 11:01:55

Hot news! PC-3000 Portable, version 1.5.1

Hot news! PC-3000 Portable, version 1.5.118th of July 2012WD Marvell
[*]New HDD families have been added into support list: SADLE 2D, MZTGP, Draco;
[*]New SA access mode by ABA in ABA/CHS translation mode has been added for ROYL drives;
[*]New selection feature (by ID/by ABA) has been added for all SA module checking modes;
[*]Control of hidden defects in SA according to the module 30 has been added.
Seagate F3
[*]Descriptions for DR (Drive Tables, “before – CP”) and service modules have been added;
[*]Utility menu structure has been changed;
[*]Added support for defect hide cmd Rev 3;
[*]Fixed error of outputting DT description in protocol, during reading in profile and DB.
Seagate Classic (Baracuda)
[*]New HDD families have been added into support list: LD25.1(MLite), LD25.2(Mustang);
[*]Terminal speed control feature is available from utility menu.
Samsung
[*]New HDD families have been added into support list: МН80, M8E, N1 1.8;
[*]Before you choose family, terminal tab is activated at the background which enables to monitor drive start log without initializing the utility;
[*]New attention log about untypical LBA size during utility launching has been added;
[*]New feature of auto switching micro program in test mode during ROM reading/writing problems (via terminal);
[*]New “View ROM dump info” test has been added for following HDD families: VOYAGER11+, VICTOR, PUMA, VICTORPLUS, VERNA, VERNALITE, VANGO, VANGOPLUS, PANGO, VELOCE, PALO, Poseidon, DELPHI, Caesar, P80M, Trident, T166, Storm2, Trident3, MAGMA, M40S, M60, M80, MANGO, M5P1, PARAGON, M6, MT1;
[*]The ability of heads selection has been added in SA structure test;
[*]New option of errors ignoring during composite reading has been added in “Reading Modules” test;
[*]«Platform Id get error» has been fixed. This error can occur during Trinity drive ROM analysis (disassembling);
[*]“Unknown tech key” error has been fixed. This error can occur when you press “skip” button at reading service track test.
Toshiba
[*]New HDD families have been added into support list: 34GAL, 56GSY, 59GSXP, 61GSY, 64GSY, 65GSX.
HITACHI-IBM-ARM
[*]New special utility has been added for Hitachi HDD based on ARM architecture.
PC-3000 Kernel
[*]Output buffering added in terminal (prevents program crash during large data transfer at high speed in terminal);
[*]Mechanism of mutual exclusion for access to PC-3000 Portable adapter has been seriously improved. During commands execution, new technique of power control has been added.
Data Extractor
[*]Added feature to export RAW recovery result into .CSV file;
[*]Raw Recovery mode algorithm has been improved. Execution speed increased by 20-30%;
[*]In Raw Recovery result, new ”Comment” field has been added. There you will find the most typical information for current result, which enables to see difference in list-view results (for example: distinguish between the different partitions of superblocks);
[*]In log context menu, new option “open as LBA” has been added. It allows selecting numeric value, and immediately open sector editor for it;
[*]The algorithm of forming a new name for the duplicate file when you save with the "rename" has been changed and improved;
[*]Disk Analysis mode has been improved
- New file systems have been added into support list: UFS1/UFS2, ReiserFS;
- Implemented creation of virtual FAT16 and FAT32 partitions even in case when BOOT or/and FAT Tables are lost;
- Implemented correct addition of virtual XFS, ExtX, UFS1/UFS2 partitions even iwhen the first superblock has been damaged;
- Added single automatically launching method when MBR, GPT, APM are lost or damaged.

[*]New File systems have been added into support list: EXT4, XFS, ReiserFS;
[*]NTFS File System: Partition data analysis method has been added;
[*]FAT File System: Partition data analysis method has been added;
[*]UFS2, UFS3 File Systems: Partition data analysis method has been added;
[*]In Raw Recovery mode, searching for service structures has been added for the following file systems: exFAT, HFS+, XFS, ExtX, UFS1/UFS2, ReiserFS.

永远忆你2 发表于 2012-8-24 22:59:01

本帖最后由 军达成技术支持1 于 2015-10-8 14:34 编辑

什么时候放出来啊,我们在一年的,怎么升级啊

军达成技术总监 发表于 2012-8-25 19:53:05

永远忆你2 发表于 2012-8-24 22:59 static/image/common/back.gif
什么时候放出来啊,我们在一年的,怎么升级啊

可以下载从你们的FTP

永远忆你2 发表于 2012-8-31 10:45:33

本帖最后由 军达成技术支持1 于 2015-10-8 14:35 编辑

张总,我的FTP 有时间,帮我问一下啊,现在里面还没有新程序啊,


军达成技术总监 发表于 2012-9-20 20:31:29

永远忆你2 发表于 2012-8-31 10:45 static/image/common/back.gif
张总,我的FTP 有时间,帮我问一下啊,现在里面还没有新程序啊,

现在已经有了

zhzhbzhzhbzhzhb 发表于 2012-10-11 21:36:11

tangyting 发表于 2012-12-28 15:43:02

本帖最后由 军达成技术支持1 于 2015-10-8 14:35 编辑

学习一下..


老A 发表于 2013-4-26 09:38:16

本帖最后由 军达成技术支持1 于 2015-10-8 14:35 编辑

现在升级什么版本了


页: [1]
查看完整版本: Hot news! PC-3000 Portable, version 1.5.1